The Pendock Linea range of building linings had its origins more than 20 years ago, when the name was first applied to its perimeter casings products, which were being widely specified to conceal HVAC systems, electrical and other interior building services.
Since then, the Linea range has expanded to include nine separate building lining and architectural finishing products that provide practical and aesthetic solutions for specific applications, while retaining a high degree of versatility.
In addition to perimeter casings, the range now encompasses wall linings, ceiling rafts, lift reveals and soffit linings, as well as bulkheads, parapet capping and pilasters. Specialised rooflight linings & atrium beam casings complete the Linea range.
As all Linea products are bespoke manufactured to meet individual project requirements, an overview and outline guide to specification has been prepared for each product.
Wall linings
Used for both interior and exterior applications requiring decorative or protective solutions, they are particularly effective in areas of high pedestrian traffic, such as airports, public transport, retail and commercial buildings to resist scuffing and damage to internal walls.
Stainless steel and aluminium are commonly specified materials, although they can also be manufactured from a wide choice of materials including plywood; MDF or compact laminate, as well as textured metallics and a range of finishes from specialists including Rimex, Trespa and Formica. Clearly, the material specification is dependent on the individual application and its external or internal location.
As all wall linings projects are bespoke manufactured, unique designs, shapes, sizes and curved forms can be specified and special requirements can be incorporated, such as acoustic performance; perforations; backlighting and specialised illumination.
Ceiling rafts
Pendock ceiling rafts, islands and linings are already used within retail and commercial environments, as well as performance venues and other large spaces to provide a decorative suspended solution.
Circular, elliptical, square, plus bespoke designs can be specified and manufactured from plywood, glass-reinforced gypsum (GRG) or glass-reinforced plastic (GRP), as well as acoustically lined perforated aluminium and stainless steel, which helps enhance acoustic performance by damping reverberations or problem frequencies.
Integral lighting can also be incorporated within the ceiling raft design, which should be considered when specifying, as it may affect the choice of material. Plywood and GRP are manufactured in thicknesses of 12mm and 4mm respectively, while options of 12 / 15 mm are available on GRG.
Lift reveals
Material options of aluminium, stainless steel, compact laminate (CL) and ply/MDF are included in the range of head and side reveals. Aluminium and stainless steel can be specified in standard thicknesses of 2mm and 1mm respectively, although bespoke thicknesses are also offered along with a range of finishes, such as brushed, polished and textured.
Laminate finishes from leading manufacturers including Polyrey; Abet and Formica can be specified on CL reveals, which combine high durability with versatility to integrate with building colour schemes. High pressure laminate (HPL) finishes are one of the options within the ply/MDF range, which also includes real wood veneers and a paint grade substrate for onsite finishing.
Bespoke finishes can be specified on all ranges together with additional options, such as the inclusion of call button apertures, indicator signage and dry riser openings.
Soffit linings
Linea soffit linings provide a versatile and high quality finish for exterior applications. Manufactured from aluminium for its low weight and inherent weather resistant properties, Linea soffit linings can be specified with PPC finishes and are available in three standard widths, as well as bespoke options, which interlock to create a uniform and attractive result.
Dedicated accessories are also incorporated within the range which includes internal & external corners, as well as flashing and trims to complement the panels.
Rooflight linings & atrium beam casings
The range incorporates decorative casings for external upstands, as well as interior rooflight lining and finishing solutions which can be manufactured from PPC aluminium and moulded GRP for interior and exterior applications, as well as moulded GRG for interior projects only,
As GRP and GRG rooflight linings and casings are bespoke manufactured from moulds, they provide a high level of fit and finish and can be specified in a range of sizes to meet individual project requirements. In the case of GRP casings, they can also help enhance weather resistance.
Used primarily to conceal structural roof beams and glazing bars, beam casings are designed to be as unobtrusive as possible so that they blend seamlessly with the atrium and building interior. Manufactured from aluminium, typically with a PPC finish, they can be produced in a range of bespoke forms to suit specific project requirements, such as ellipses and semi-circles to shallow curves, parabolic and rectangular profiles.
Parapet capping
Manufactured from 2mm thick sheet aluminium and incorporating a PPC finish, the parapet and wall capping product range incorporates flat; pitched and sloping options, which can be face-fixed or use concealed fixings.
All Linea cappings are produced to the specifications and dimensions of each individual project and be specified in lengths of up to 4,000mm in a single piece. The system also includes a range of dedicated accessories, which include internal & external corners; T-sections, peak angle and stop ends.
Bulkheads & fascias
As most bulkheads are installed at high level, durability tends to be less of a consideration, yet they must be specified to be fit for purpose for the application. Bulkhead linings can be bonded or mechanically fixed to a timber subframe depending on their size and weight.
GRP and metal bulkheads can be specified for interior and exterior use, while GRG and ply/MDF core options can only be used for interior applications.
Moulded bulkheads, accommodating curved forms, tend to be made from GRG or GRP for reasons of weight and ease of creating a seamless integrated finish. GRP units are supplied with a smooth gel-coat finish, while GRG is site painted.
Metal bulkheads, like the other products in the range, are bespoke manufactured and can be specified in a range of PPC finishes, as well as brushed, polished or textured options. Specifiers should be aware that moulded items will extend lead times by up-to four weeks, due to the additional design and manufacturing processes involved.
Pilaster linings
Linea pilaster linings are almost exclusively used in shopping malls to conceal steelwork and roller shutter guides between individual shops, giving a uniform look and finish. GRG and laminated plywood are commonly specified material choices with the former providing additional fire safety and material compatibility with other drylined elements.
Radiused corners and semi-circular forms can further improve safety by removing sharp edges. Stainless steel kickplates can be specified for added durability, while specifiers can choose to make pilasters blend-in or contrast with their surroundings through colour and material choices, including wood grain laminates and metal effects for plywood pilasters.
Pilaster casings can also be designed to accommodate additional services, such as mains sockets, fire alarms and CCTV, which can be surface mounted.
Perimeter casings
Perimeter casings are designed to conceal building services along interior walls and below windows in long continuous runs or within bays between columns. They are generally manufactured from pre-formed plywood with a hard-wearing laminate finish and incorporate pre-cut convection grilles in the top and front face when used in HVAC concealment applications.
Suitable for both new build and refurbishment projects, their design helps maximise office space while enabling them to incorporate electrical, cable and voice cable management. The system also incorporates Pendock’s proprietary metal mounting framework, which was developed specifically for use with this casing range and provides a robust structure onto which the casing panels and be easily fitted.