Powder coatings are continually evolving with a number of aesthetic finishes demonstrating variations in colour and patination. Realistic alternatives to masonry materials such as GRC, pre-cast concrete and Portland Stone can now be realised.
Not long ago, the mere prospect of powder coated aluminium being proposed in lieu of the aforementioned materials would have been seen purely as a value engineering exercise. Whilst this still holds true to a certain extent, the advancements in coatings technology and creative configurations in aluminium design, have enabled it to compete far more closely than ever before.
The use of a powder coated aluminium panel offers a number of significant benefits for those across the supply chain. From an Architect’s perspective, the drive to provide buildings with a sense of solidity and longevity was central to the rise of GRC cladding. By its very nature, it is heavy duty but offers a desired level of refinement.
With a GRC-like powder coating, allied to creative panel design and subsequent fabrication, this design intent can be achieved. Aluminium panels can now be articulated in the form of GRC, ensuring clean lines are achieved whilst retaining the feeling of mass.
Aluminium fabricators and installers forever strive for flexibility and ensuring that complexity is minimised as much as possible during installation. A large part of this stems from the ability to reduce weight. A 3mm pressed cladding panel will typically weigh 8kg/m², whereas this increases to 65kg/m² for GRC. This has a threefold effect; handling is much easier, machinery is reduced, and the supporting framework becomes simpler. Furthermore, should any damage occur during or post-installation, the lightweight nature of aluminium panels facilitates ease of replacement.
Significant savings can be realised in material cost when selecting aluminium over GRC; appealing to contractors and building owners alike. When this is allied to the reduction in the amount of bracketing support required, it is not uncommon to achieve 300% decrease in installed cost. To put this into perspective, an external package totalling 5,000m² would yield a monetary saving of £1m.
Concrete materials are inherently more difficult to maintain, with surface treatment and sealant needing to be regularly re-applied. In addition, the risk of efflorescence; a natural occurring phenomenon where unsightly white salts form on the surface layer, cannot be mitigated.
For those wishing to retain natural masonry, a compromise can be achieved. It is not uncommon to find examples of GRC/stone being deployed for ground level elements, whilst a closely matched powder coated aluminium is utilised for parts that sit comfortably above eye level.
Aluminium fabricators and installers forever strive for flexibility and ensuring that complexity is minimised as much as possible during installation. A large part of this stems from the ability to significantly reduce weight. A 3mm pressed cladding panel will typically weigh 8kg/m², whereas this increases to 65kg/m² for GRC. This has a threefold effect; handling is much easier, on-site machinery is reduced, and the supporting framework becomes simpler. Furthermore, should any damage occur during or post-installation, the lightweight nature of aluminium panels facilitates ease of replacement.
Significant savings can be realised in material cost when selecting aluminium over GRC; appealing to contractors and building owners alike. When this is allied to the reduction in the amount of bracketing support required, it is not uncommon to achieve 300% decrease in installed cost. To put this into perspective, an external package totalling 5,000m² could yield a monetary saving of £1m.
Concrete materials are inherently more difficult to maintain, with surface treatment and sealant needing to be regularly re-applied. In addition, the risk of efflorescence; a natural occurring phenomenon where unsightly white salts form on the surface layer, cannot be mitigated.
For those wishing to retain natural masonry, a compromise can be achieved. It is not uncommon to find examples of GRC/stone being deployed for ground level elements, whilst a closely matched powder coated aluminium is utilised for parts that sit comfortably above eye level.
Of equal importance, is the consideration of longevity and overall maintenance requirements. There is rising expectations of a buildings design life and the need for the full façade envelope to offer a longer service life. Ultimately, the goal is to ensure the building looks good for as long as possible without the need to replace or recoat parts: this is the primary function of super durable powder coatings. Acting as a tough layer of sun block, they offer 5x greater protection from UV when compared to standard technologies (often RAL based colours). 40 year guarantees are available providing application is channelled through an approved network of applicators and regular maintenance is adhered to (typically once every 18 months).
In summary, powder coated aluminium offers a strong value proposition to all those involved in the design, fabrication and installation of external facades. The ability to closely mimic natural materials and develop flexible panel designs opens up a wide range of possibilities. A growing number of residential and commercial developments have already reaped the benefits, and with this, a new stone age is dawning.